pH+ Plus Incrementador pH+ granulado – BAYROL

pH+ Plus pH+ increaser granules – BAYROL

Features:

– Rapid and complete dissolution.
– Product includes a measuring spoon for precise dosage.
– Filtration should be done every day (time equal to the water temperature divided by 2).
– It doesn’t make the water cloudy.
– Does not corrode materials.
– Type of filter: all.
– Swimming pool volume: for all pool sizes.
– Where: directly in the water.
– When to dose: whenever necessary.
– Dosage: apply 100 gr per 10 m 3 to increase the pH by 0.1.

Advantages:
– Filtration must be done every day (time equal to the water temperature divided by 2).
– pH-Plus is a high-quality granulated soda ash product.
– Its high chemical purity guarantees fast and effective action.
– Compatible with all disinfection methods (chlorine, bromine, active oxygen), and with all types of filter (sand filters, cartridge filters, diatom filters, …), as well as all pool surfaces (liner, concrete, polyethylene).
filters, cartridge filters, diatoms, …), as well as all pool surfaces (liner, concrete, polyester).
– Thanks to the closed dosing cup, dosing the granulate is very easy and the correct pH value can be precisely adjusted.
– Embalagem: 5 kg.

Advice for use:
– Check the pH value twice a week, each time new water is added and after rain.
– To ensure a pleasant bath, you should make sure that disinfectants always work with a pH between 7.0 – 7.4 (7.4 – 7.6 with bromine).
– Dose the pH-Plus product directly at various points in the pool and in front of the pool’s injection nozzles, with the filtering system running.
– Do not dose this product into the skimmer.
– After treatment, leave the filtration running for 2 to 3 hours, check the
pH value and adjust if necessary.

Recommendations:
– Filtration should be done every day (time equal to the water temperature divided by 2).
– This treatment should preferably be carried out at the end of the day, after the last shower of the day. If the water is soft, you may need to add more.
– Do not dose more than 500 gr. of pH Plus per 10 m 3 of water, per treatment.