Aquabrome® pastilhas – BAYROL

Aquabrome® tablets – BAYROL

Features:

– An absolutely pleasant bath: no residual odors.
– For all types of filtration (physical treatment).
– For all pool sizes.
– Where: in the bromine dispenser.
– When to dose: for continuous treatment
– The reliability of a powerful disinfectant: Eliminates all types of impurities (bacteria, micro-organisms).
– Effective at high temperatures.
– A high pH does not alter its effectiveness.
– A major advantage: its practical operation in slow and complete dissolution and autonomous long-term treatment thanks to the bromine dispenser.

Advantages:
– Aquabrome® is a highly effective disinfectant specially designed for the treatment of swimming pools.
– The tablets eliminate germs and oxidize impurities in the water, ensuring constant and effective water disinfection.
– Keeps the water clean and clear.
– It is a delicate product for the skin and hair.
– Product with 70% active bromine.
– Embalagem: 5 kg.

Advice for use:
– Use exclusively with a bromine dispenser.
– Adjust the pH between 7.0 and 7.6 and the TAC value above 10 ºF.
– The concentration of bromine in the water depends on the water flow rate in the bromine tablet dispenser: Optimum bromine value (private pool): between 1 and 3 mg/l, (public pool): between 3 and 5 mg/l.

Recommendations:
– It is advisable to use automatic bromine measurement, regulation and dosing (automatic doser).
– Do not use bromine in water containing cyanuric acid (chlorine stabilizer) at a concentration of 20 mg/L.
– Do not put bromine in the skimmer or floating dosing unit or in a chlorine dosing station. In the event of algae or cloudy water, carry out a shock treatment with granulated active oxygen.
– Filtration should run every day (time equal to water temperature divided by 2).
– In the event of high temperatures or intensive use of the pool, it may be necessary to dose more product.
Warnings: Never mix different chemicals in concentrated form. Always add the product to water and never the other way around.
– Avoid direct contact of the product with delicate coatings (liner, paint, etc.), as this could discolor or damage them.