Alca-Plus granulado fino – BAYROL

Alca-Plus fine granules – BAYROL

Features:

– Does not corrode materials.
– Fast-acting.
– It doesn’t make the water cloudy.
– For all types of filtration (physical treatment).
– For all pool sizes.
– Where: directly in the water.
– When to dose: whenever necessary.
– Dosage: apply 180 gr per 10 m 3 – to increase the TAC by 10 ml/l.

Advantages:
– Corrects water instability due to low alkalinity (TAC value less than 80 mg/l).
– Its composition of fine granules allows the water to be raised quickly and efficiently.
– It strengthens the water balance, which is essential for the effectiveness of other treatments.
– It can be used throughout the season and, if necessary, is essential at the start of the season when pools are opened, particularly in the event of pH fluctuations and low alkalinity.
– Embalagem: 5 kg.

Advice for use: Test the alkalinity (TAC value) at least once a year.
– The ideal alkalinity is between 80 and 120 mg/L (8 and 10 °F). At these values, flocculation is optimized and strong pH fluctuations are avoided.
– Dose Alca-Plus directly into the pool water, with the filtration system running.
– After treatment, let the filtration system run for 2 to 3 hours, analyze the TAC value and readjust if necessary.
– If Alca-Plus is dosed automatically, if the TAC value approaches 150 mg/L (15 °F), dosing should be stopped.
– pH regulation should be discontinued while Alca-Plus is being dosed.
Recommendations:
– Filtration should be done every day (at least as long as the temperature of the split water is the same).
– This treatment should preferably be carried out in the evening, after the last shower of the day.
– After dosing with Alca-Plus, it may be necessary to correct the acid pH.
– To prevent the water from becoming cloudy, do not dose more than 500 gr. per 10 m 3 of water.